Cause
Toner mixture fault (C-2455 Yellow, C-2456 Magenta, C-2457 Cyan, C-2458 Black)
Resolution
- Power the machine OFF from the main switch leaving the sub switch ON.
- Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
- Press 02 Process Adjustment
- Press 02 Drum Peculiarity
- Select 04 Toner Density Revert, Select "All On" button, then hit the Start Button on the keypad, the machine should start to make a noise.
(if the readings are very high on any of the colours perform as below for that colour
Values for toner should be in around 6.4, you might have to run a few times to get it near 6.4)
- A message "Completed" appears when finished.
- Select 02 and run the Gamma Automatic Adjustment, a message "Completed" will appear in the top left when finished.
- Exit Service mode to return to normal operation